W92 Locking Tilt Turn Window Handle
Locking Tilt and Turn Window Handle
- Solid heavy metal construction – real quality!
- Ideal for replacement upvc tilt and turn window handles.
- 360 degree movement of tilt and turn window handle.
- Tilt Safe mode is built into the lock for child safety!
- Each 90 degree position can also be key locked (same pattern).
- Gold PVD finish has extra finish resistance.
- Spindle lengths available – 32mm, 38mm and 44mm.
- Replacement tilt and turn handle with 43mm fixing centres.
- Read the guide on replacement tilt and turn window handles.
- Cover cap and key supplied.
W92 Replacement Locking Tilt and Turn Window Handles
Fitting this replacement tilt and turn window handle is very easy to do. This is a spindle based tilt and turn window handle with a 7mm square spindle in three different lengths of 32mm, 38mm and 44mm. You can select one of these lengths when ordering through the prompt on the page above. As long as your current handle has a 7mm square spindle and the two fixings are 43mm apart between their centres then this is the replacement handle you need for your tilt and turn windows. We have produced a short guide on replacement tilt and turn window handles so be sure to check this out if you have any concerns.
Due to the nature of the window application being tilt and turn or turn and tilt the emphasis will be on safety and here the W92 is nothing short of revolutionary with its lock in all positions feature. This means you can turn the handle and lock the handle from moving any further should you be worried that the next turn will cause safety concerns with the window being controllable by a child. Even more impressive is the fact that the handle can be locked in a tilt safe mode meaning the handle will be open to turn for the tilt position but key locked from turning any further. To enable this feature you need to turn the key only a quarter of a turn and not a full 180 degrees.
W92 Tilt and Turn Window Handle Sizes, Finishes and Useful Information:
Base width is 32mm, base length is 65mm, handle depth is 55mm. The handle shank is 117mm long from the centre of the key locking barrel.
The polished gold finish is close to a brass polished finish but has the extra protection of a PVD coating which gives much longer protection against surface degradation and scratches etc. Our black finish is a matt finish and is stunning and our range of colours is completed with a satin chrome, polished chrome and a semi-gloss white colour. The white and the black tilt and turn handles are made from an aluminium alloy and the satin chrome, polished chrome and PVD gold handles are made from a zinc alloy. Zinc alloy is a heavier material than the aluminium alloy. The white finish has a slight sheen to it and is a powder coated finish with all other finishes being electro-plated. The product is made in Germany and is the high quality you would expect from a manufacturer that takes care to produce quality products time and time again! So, if you are looking for locking tilt and turn window handles then look no place else but Handlestore!
Coronavirus: Orders are currently being dispatched on time but couriers may take longer to get to you due to issues surrounding Coronavirus. Delivery times quoted cannot be guaranteed.
The following special offers are available to you when you buy the W92 Tilt Turn Window Handle. The discount for the special offer will show in the cart if both the W92 and the special offer product are added.