• Click for email Support
  • Visit our Knowledge Centre
  • Free Std Delivery over £42

H01 - 10" Top Hung uPVC Window Hinges

£5.45 Exc Vat £6.54 Inc Vat

In stock

See More Window Hinges

  • 10" Top hung uPVC window hinges

  • 10 inch long replacement upvc window hinge with black end cap.
  • Universal & replaces all standard 10 inch top hung upvc hinges.
  • Sold as pair of top hung hinges for one top hung window.
  • Stack height size of 13mm and a conversion pack for 17mm.
  • Easy - clean opening position of 85 degrees with this 10 inch hinge.
  • Follow this guide how to replace your upvc window hinges
  • Strong stainless steel hinges for max upvc window size of 400mm (H) x 1200mm (W)
  • Strengthened metallic end cap design and 4 bar construction.

* Required Fields




10" Top hung uPVC window hinges (H01) - Technical Information

Please note this hinge is for top hung windows where the hinges are fixed to the sides of the window and the track length is 10 inch long by 18mm outer width.


This 10 inch top hung upvc window hinge is used for a normal double glazed window where the maximum opener weight is 16kg and in general terms is a upvc window with the sizes 275mm - 400mm height and 1200mm (1.2M) width.

The opening angle of the upvc window using the 10 inch top hung hinge is approximately 85 degrees and is achieved via a 4 bar construction riveted to a sliding plastic block with an integral brass screw for friction stay adjustment. This top hung upvc friction hinge is made in the UK (stamped as such) and is made from ferritic stainless steel.


Fixing sizes for the 10 inch window hinge


Fixing sizes can be referred to via the diagram under the main picture above or summarised as:

Track fixing (length 255mm)

Sizes from the cap end: Hole - 15mm | Slot - 30mm | Hole - 208mm | Slot - 250.5mm

Arm Fixing (length 205mm)

Sizes from the corner end: Slot - 36mm | Hole – 66.5mm | Slot - 187.5mm

When replacing 10 inch upvc window hinges please read this short guide on how to replace upvc window hinges

European Deliveries: Suspended from 21st Dec 2020 until further notice..

Coronavirus: Orders are currently being dispatched on time but couriers may take longer to get to you due to issues surrounding Coronavirus. Delivery times quoted cannot be guaranteed.

Hermes Delivery is currently taking between 1 and 5 working days.

If you have received your tracking number via email from Hermes you can check the status here.

If you want to find a Hermes parcel shop use this link here.

* UK deliveries over 15kg in weight will be delivered by DPD.

** Does not include weekend or Bank Holiday delivery days.

Delivery Charges Hermes and DPDHermes TrackingHermes Parcelshops


The following special offer is available to you when you buy the H01 - 10" Top Hung Pair uPVC Window Hinges. The discount for the special offer will show in the cart if both the H01 - 10" Top Hung Pair uPVC Window Hinges and the special offer product are added.

Customer Reviews 1 item(s)

  • Price
    Review by PJW Guildford
    (Posted on 22/08/2018)
    Excellent products, price, service & delivery of 3-off H01 - 10" Top-Hung uPVC window hinges
    Can't recommend this company more highly. Had to replace three sets of failed hinges installed in 2004 in first-floor half-lights. Given their location & awkwardness to get at, priority was exact match with existing screw holes; matching outer width, quality & price were also key factors. ALL BOXES TICKED. Website is excellent; easy to navigate & very helpful. Installation needed two pairs of hands because of locations & risk of dropping windows from the first floor! Otherwise job went very smoothly. Spacers supplied with the hinges fitted perfectly to convert from the 13mm stack height supplied to the 17mm replaced. I would high recommend also purchasing a set of repair screws. I planned to reuse the screws removed; this worked in the majority of cases, but of the total of 36, maybe three or four had stripped threads in the uPVC & needed the repair screws; these worked very well. You don't want to be caught in the situation with insufficient screws that work. Screw length might also be an issue. The problem is that you don't know in advance if you've got 13mm or 17mm stack height hinges, you're not sure if the screw length is adequate if you have to fit the spacers & the amount of thread available in the existing screws lessens. I used the 16mm length repair screws & all seemed OK. There may be other situations where this is not the case & 22mm length would be necessary. Anyway, alls well & the three half-lights are functioning as new.

Write Your Own Review

You're reviewing: H01 - 10" Top Hung uPVC Window Hinges

How do you rate this product? *

1 1 star
2 2 star
3 3 star
4 4 star
5 5 star