A few tips!
These Scrolled Swan 92pz upvc door handles are used on exterior upvc doors where a specific size multi-point lock exists. Be sure to measure the sizes correctly to ensure you have the correct set of replacement handles. This handle is known to replace a three fix screw handle with a scrolled design where the middle hole is omitted.
For further help please visit our video how to replace upvc door handles.
Your current handle must have the following sizes to use the D11:
Size A: 92PZ - this is the 92mm size between the centre of the cylinder lock and the centre of the lever handle (spindle).
Size B: Top screw hole centre to lever centre (spindle) of 21mm.
Size C: Size between the screw centres of 122mm.
Door Handle Screws For Scrolled Swan 92PZ (D11)
It is important to check the thickness of your door to ensure that the screw pack sent with the Scrolled Swan 92PZ door handle is correct otherwise the door handle screw may be too short or too long (in this case you can hacksaw them down to size).
The Scrolled Swan 92PZ door handle is supplied with two spindle packs. The wooden door pack is a 100mm split spindle with two split spindle grub screws and will suit doors of 35 or 45 thickness. The upvc door pack is a 130mm long spindle with flat grub screws and will cater between 58 and 70mm door thickness found on most upvc doors.
The screws supplied are M5 size x 90mm that can be cut down to accommodate your door thickness.
These links will direct you to the door handle screws and door handle spindles.
Notes:
Special cleaning is not necessary for any of the finishes shown as dirt can be removed with a damp cloth.The use of caustic cleaners or chemicals should be avoided.